Keterangan :

CENTRALA - SMARTLINE 020/ 4
Fire Alam and Extinguishing Systems

Description:
The device SmartLine020 / 4 of a conventional fire control panel 4-zone, expandable to 20 zones using the module SmartLine/ 8Z. The extreme compactness and ease of programming and use makes the control panel is ideal for small applications, where important aspects are fast installation and programming applications.
SmartLine020 provide fire cover for the module SmartLetLoose / ONE.Jest This module meets the EN12094-1 standard and offers a full range of operation for the management of gaszenia.SmartLine020 has two supervised output for alarm and fault signals ( the efficiency of these outputs are continuously monitored) . Headquarter Fire SmarLine can detect and diagnose abnormal conditions, and provides a broad spectrum of visual signals: alarm, prealarm, vulnerability, early warning, the test provides a itd.Centrala terminal zone configurable as: open-collector output, output supervised, monitored input, gas sensor input interface 4-20 mA, the gas sensor input interface open collector outputs. This flexibility greatly increases the scope of SmartLine020.
Information about the system provides a graphical display and LED on the control panel. SmartLine020 manages bus 485, which can connect up to 4 terminals elevated ( model SmartLetUSee / LCD) . Terminal repeat all of the data gained from the central fire and allow the user to access and control system in accordance with their level of access. Programming the control system is simple and hassle-free by displaying the user to perform on the graphical display. The system can also be programmed using the software SmartLeague ( running on Windows) .This method allows the installer to program the entire system in your home or office, and then send the data via RS232 from the PC to the panel.
SmartLAN/ 485 module allows you to connect the motherboard to any Ethernet network through a bus 485 in order to obtain remote access ( via Internet) to the fire detection system. This module allows you to remotely upload / download data and monitoring system with the software company SmartLook INIM.
Specifications:
Conventional fire panel
Available with 4 zones, expandable to 20
EN54 approved
Complies with EN12094-1 ( Module extinguishing)
Supports up to 32 devices per loop
Managed by the extinguishing system SmartLetLoose / ONE ( compliance with EN12094-1) ( module)
Provides support for 4 terminals learned
A supervised alarm output ( NAC)
1 output for activating the dialer
1 isolated output failure
1 isolated output fault
An additional output power
A power supply output resetowalne
1 terminal on the zone configurable as: open-collector output, controlled output, controlled entrance, NTRY gas detector interfaces 4-20mA gas detector input interface open collector outputs
Relay to disconnect the battery with heavy discharge
Backlit graphic display
Navigation keys for easy access to the functions displayed graphically
Quick Access Keys ( Mute, Reset, Evacuation, Verification)
RS485 Interface for communication with terminals acquired in
Buzzer ( to ensure sound signals)
RS 232 to download / upload data
Windows Software
Easy programming via control panel
Access key for the function at level 2 ( in line with EN54)
Connector on the front panel for connection of the thermal probe
Testing the battery life
Metal housing
Main power supply 230Vac? 10%
Switch mode power supply / charging Acc. 1.4a @ 27.6Vdc
Place the two rechargeable 12V, 7Ah
Dimensions ( WxHxD) : 325x325x80mm
Weight ( without batteries) : 3Kg
For More Info Visit
www.askhitech.com

www.fingerpak.com