Keterangan :

020 AND 040

Quick Specification:
SmartLineO2O
The SmartLineo20 conventional fire-detection control panel serie offers a 2 zones model ( SmartLine02o-02)
and a 4 zones model ( SmartLine020-04) .
While the SmartLine020-02 model is not expandable, the SmartLine020-04 is expandable by means of 2
SmartLine/ 8z boards; each board can add up to 8 zones to the control panel, allowing it to manage 20
zones
• Conventional fire detection control panel with 2 zones or 4 zones expandable to 20
• Switching power supply/ battery charger 1 .4A © 27.6Vdc
• Battery housing for two 7Ah, 1 2V batteries
• Dimensions ( HxWxD) : 325x325x80mm
• Weight ( without batteries) : 3Kg
SmartLineO36
SmartLine036 is an expandable conventional fire-detection control panel.
The standard model offers 4 zones easily expandable by means of SmartLine/ 8Z expansion board. It is possible to add up to 4 expansion boards, that allow the control panel to manage 36 zones.
• Conventional fire detection control panel with 4 zones expandable to 36
• Switching power supply/ battery charger 4A © 27, 6Vdc
• Battery housing for two 1 7Ah, 1 2V batteries
• Dimensions ( HxWxD) : 497x380x87mm
• Weight ( without batteries) : 6Kg
SmartLineO2O-EXT
The SmartLine020-EXT is a development of the 4 zones SmartLineo2O-04 conventional fire alarm control panel. It offers 1 SmartLetLoose/ ONE extinction channel and all the functions of the SmartLine020-04 conventional fire alarm control panel.
The SmartLine020-EXT can be interfaced with analog-addressable fire alarm control panels from the SmartLoop series in order to furnish them with fire-extinguishing functions. Interfacing is achieved through the RS485 connector on-board the SmartLine020-EXE In this way, the SmartLine020-EXT can be programmed to activate its functions on the basis of “ local� information ( conventional zones, start-extinction terminals, stop extinction terminals, etc.) , and on the basis of “ remote� information coming from the SmartLoop control panel.
SmartLineO36-EXT
The SmartLine036-EXT is a development of the 4 zones SmartLine036 conventional fire alarm control panel. It offers 1 Smar-tLetLoose/ QNE extinction channels and all the functions of the SmartLine036 conventional fire alarm control panel. The SmartLine036-EXT can be interfaced with analog-addressable fire alarm control panels from the SmartLoop series in order to furnish them with fire-extinguishing functions. Interfacing is achieved through the RS485 connector on-board the SmartLine036-EXT. In this way, the SmartLine036-EXT can be programmed to activate its functions on the basis of “ local� information ( conventional zones, start-extinction terminals, stop extinction terminals, etc.) and on the basis of “ remote� information coming from the SmartLoop control panel.
SmartLine020

SmartLine/ 8Z

SmartLine036

Features and technical specifications of the SmartLetLoose/ ONE fire extinguishing board

Order Codes
• EN12094-1 approved ( Fire extinction)
• Microcontroller board supervised by the CPU
• Fast keys to disable the fire extinguishing system:
automatic mode and manual mode
• System LEDs ( status, disabled, faults)
• Supervised terminals for manual fire extinction commands
• Supervised terminals for stop fire extinction commands
• Supervised terminals for pressure switch control
• Output for fire extinguishing system activation
• Output for signaling activation ( pre-extinction)
• Output for fire extinction " running" or " ended" signals( programmable)

SmartLineO2O-02: 2 zones conventional control panel
SmartLineO2O-04: 4 zones expandable to 20 conventional control panel
SmartLineO3G: 4 zones expandable to 36 conventional control panel
SmartLineO2O-EXT: 4 zones expandable to 20 extinction control panel
SmartLineO36-EXT: 4 zones expandable to 36 extinction control panel
SmartLirie/ 8Z: 8 zones expansion board
SmartLetloose/ ONE: Fire extinction board ( 1 channel)
SmartLetUSee/ LCD-Lite: Remote-control repeater panel
SmartLeague: Programming and management software for INIM products, runs under WindowsTM
SmartLink: Dialler and PSTN line generator
Link232F9F9: RS232 cable link between PC and INIM devices
1PS24040: Switching power supply/ battery charger 1 .4A@ 27.6Vdc
IPS24140: Switching power supply/ battery charger 4A@ 27.6Vdc
ProbeTH: Thermal probe. This device protects the battery against overheating and consequent permanet damage.

For more info
www.askhitech.com
www.fingerpak.com