Katalog Produk

Keterangan

The HD2305.0 is a portable instruments with a large LCD display. It measures the pH and the redox potential (ORP) in mV. It measures the temperature using Pt100 or Pt1000 immersion, penetration or contact probes.The electrode calibration can be carried out on one, two or three points at 4.01pH, 6.86pH and 9.18pH.The temperature probes are fi tted with an automatic detection module, with the factory calibration settings already being memorized inside.The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the Auto-HOLD function, and the automatic turning off that can also be disabled.The instruments have IP67 protection degree.
INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions (Length x Width x Height) 140x88x38mm
Weight 160g (complete with batteries) Materials ABS
Display 2x41D2 digits plus symbols Visible area: 52x42mm
Working conditions
Operating temperature -5…50°C Warehouse temperature -25…65°C Working relative humidity 0…90%RH without condensation
Protection degree IP67
Power Batteries 3 1.5V type AA batteries
Autonomy 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20¼A
Connections Input module for the temperature probes 8-pole male DIN45326 connector pH/mV input Female BNC
Measurement of pH by Instrument Measurement range -2.000…+19.999pH
Resolution 0.01
Accuracy ±0.01pH±1 digit
Input impedance >1012©
Calibration error @25°C æOffsetæ>20mV
Slope63mV/pH Sensitivity 106.5%
Measurement of mV by Instrument Measurement range -1999.9…+1,999.9mV
Resolution 0.1mV
Accuracy ±0.1mV
Drift after 1 year 0.5mV/year
Measurement of temperature by Instrument
Pt100 measurement range -200…+650°C
Pt1000 measurement range -200…+650°C
Resolution 0.1°C
Accuracy ±0.1°C
Drift after 1 year 0.1°C/year

ORDER CODES
HD2305.0KE: The kit is composed of: instrument HD2305.0, KP30 electrode, TP87 temperature probe, 4.01pH and 6.86pH buffer solutions, 3 1.5V alkaline batteries, operating manual, case.
HD2305.0K: The kit is composed of: instrument HD2305.0, TP87 temperature probe, 3 1.5V alkaline batteries, operating manual. The electrodes must be ordered separately.
pH Electrodes
KP20: Combined pH electrode, gel-fi lled, with screw connector S7, body in Epoxy, Ag/AgCl sat. KCl.
KP30: Combined pH electrode, cable 1m, gel-fi lled, body in Epoxy, Ag/AgCl sat. KCl.
KP60: Combined pH electrode, 1 diaphragm, gel-fi lled, with screw connector S7, body in glass, Ag/AgCl sat. KCl.
KP 61: Combined pH electrode, 3 diaphragms for milk, cream, etc. gel-fi lled, with screw connector S7, body in glass, Ag/AgCl sat. KCl.
KP 62: Combined pH electrode, 1 diaphragm for pure water, paints, etc. gel-fi lled, with screw connector S7, body in glass, Ag/AgCl sat. KCl.
KP 70: Combined pH electrode, micro diam. 6 x L=70mm, gel-fi lled, with screw connector S7, body in glass, Ag/AgCl sat. KCl.
KP 80: Combined pointed pH electrode, gel-fi lled, with screw connector S7, body in glass, Ag/AgCl sat. KCl.
CP: Extension cable 1.5m with BNC connectors on one side and S7 on the other side for electrode without cable.
CE: Screw connector S7 for pH electrode.
BNC Female BNC for electrode extension.
ORP Electrodes
KP90: REDOX PLATINUM electrode, with screw connector S7, gel-fi lled, body in glass.
pH Buffer solutions
HD8642: Buffer solution 4.01pH - 200cc.
HD8672: Buffer solution 6.86pH - 200cc.
HD8692: Buffer solution 9.18pH - 200cc.
Redox Buffer solutions
HDR220: Redox buffer solution 220mV 0.5 l.
HDR468: Redox buffer solution 468mV 0.5 l.
Temperature probes complete with SICRAM module
TP87: Pt100 sensor immersion probe. Probe’s stem Ø 3mm, length 70mm. Cable length 1 metre.
TP472I.0: Pt100 sensor immersion probe. Stem Ø 3 mm, length 230 mm. Cable length 2 metres.
TP473P.0: Pt100 sensor penetration probe, Stem Ø 4mm, length 150 mm. Cable length 2 metres.
TP474C.0: Pt100 sensor contact probe. Stem Ø 4mm, length 230mm, contact surface Ø 5mm. Cable length 2 metres.
TP475A.0: Pt100 sensor air probe. Stem Ø 4mm, length 230mm. Cable length 2 metres.
TP472I.5: Immersion probe, sensor Pt100. Stem Ø 6mm, length 500 mm. Cable length 2 metres.
TP472I.10: Pt100 sensor immersion probe. Stem Ø 6mm, length 1,000mm. Cable length 2 metres.
Temperature probes without SICRAM module
TP87.100: Pt100 sensor immersion probe, Probe’s stem Ø 3mm, length 70mm. Connection cable 4 wires with connector, length 1 metre.
TP87.1000: Pt1000 sensor immersion probe. Probe’s stem Ø 3mm, length 70mm. Connection cable 2 wires with connector, length 1 metre.
TP47: Only connector for probe connection: direct 4 wire Pt100 and 2 wire Pt1000.