This easy to use gauge measures the peak-to-valley height of a blast cleaned surface.

The average of a series of measurements provides an indication of the surface roughness....

Elcometer 122 Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile, ....

In protective coating applications there is a requirement to measure surface roughness.

Measurements of Surface Roughness are expressed in terms of Ra, Rz or Tp. These values....

Before painting, the coater must meet the coatingsâ € ™ parameters. These are clearly specified on the paint manufacturerâ € ™ s product data sheet.

Relative Humidity ( RH) and....

Before painting it is necessary to check that the climatic conditions are suitable for the coating being applied. These are clearly specified on the paint manufacturerâ € ™ s....

These instruments are designed to determine the dewpoint and relative humidity at any given time.

The Elcometer 116A Whirling Hygrometer is available in Celsius scale. A guide....

The Elcometer 215 Oven-Logger is supplied with software which has been designed specifically for the powder and paint cure processes.

Features include:

Informs you....

It is often important to ensure the temperature of the coating to be applied is at a temperature which will ensure a suitable application.

The Elcometer 210 Paint Thermometer....

This provides accurate values of Dewpoint and Relative Humidity ( RH) from the wet and dry bulb temperatures measured by a Whirling or Sling Hygrometer.

The range of the....

The Elcometer 215 is an easy to use oven data recorder, used to measure and store the temperature profiles of both the sample and the oven during the cure process. Both the....