Keterangan :

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG8040F High Rejection Brackish Water elements feature a FRP outerwrap and 31 mil feed spacers. This element is designed with flush end connections.

* GE Desal AG8040F RO Element TFC:
* The GE Desal AG8040F Dry, Flush Cut reverse osmosis elements are used for brackish water desalination.
* The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.
* GE Osmonics Desal AG8040F High Rejection Brackish Water reverse osmosis elements feature a FRP outerwrap and 27 mil feed spacers and is designed with flush end connections.
* GE Desal AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig are desired.
* These elements allow moderate energy savings, and are considered a standard in the industry.

Element Specifications

Model : AG8040F

Flow : 9200 GPD (34.8 m3/d)

Active Area : 350 ft2 (32.5 m3)

Avg. Rejection : 99.5%

Min. Rejection : 99%

Part Number : 1206779

Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH7.5 after 24 hours. Individual flux may vary +25%/ -15%.

Operating and Design Parameters

Membrane: Thin Film Membrane (TFM®)

Typical Operating 200 psig (1,379 kPa)

Pressure:

Maximum Pressure: 450 psig (3,103 kPa)

Maximum Temperature: 122°F (50°C)

Chlorine Tolerance: 1,000 ppm-hrs, dechlorination recommended

Optimum Rejection pH: 7.0 -7.5

Operating pH Range: 4.0 - 11.0

Cleaning pH Range: 2.0 - 11.5

Feed NTU: