Katalog Produk

Keterangan

Batch Counter Control Functions
The Batch Controller functions are used for controlling batching type applications. The user can select from the following
control modes:
Mode 1 On trigger, output 1 & 2 are turned OFF - unit counts (in engineering units) from a pre-set ‘reset’ value.
When batch setpoint 1 is reached, output 1 is turned ON - counts continue to be accumulated.
When batch setpoint 2 is reached, output 2 is turned ON - counts continue to be accumulated.
Unit waits for the next trigger, which must be toggled OFF then ON to reset the batch control.
Mode 2 On trigger, output 1 & 2 are turned OFF - unit counts (in engineering units) from a pre-set ‘reset’ value.
When batch setpoint 1 is reached, output 1 is turned ON - counts continue to be accumulated.
When batch setpoint 2 is reached, O/P 2 is turned ON and O/P 1 OFF - counts continue to be accumulated.
Unit waits for the next trigger, which must be toggled OFF then ON to reset the batch control.
Mode 3 On trigger, output 1 & 2 are turned OFF - unit counts (in engineering units) from a pre-set ‘reset’ value.
When batch setpoint 1 is reached, output 1 is turned ON - counts continue to be accumulated.
When batch setpoint 2 is reached, output 2 is turned ON - counts continue to be accumulated.
Automatic re-trigger will occur if the trigger state is correct (no need to toggle trigger).
Counts continue to be accumulated.
Mode 4 On trigger, output 1 & 2 are turned OFF - unit counts (in engineering units) from a pre-set ‘reset’ value.
When batch setpoint 1 is reached, output 1 is turned ON - counts continue to be accumulated.
When batch setpoint 2 is reached, O/P 2 is turned ON and O/P 1 OFF - counts continue to be accumulated.
Automatic re-trigger will occur if the trigger state is correct (no need to toggle trigger).
Counts continue to be accumulated.