*
Excellent in the long term stability.
û Accuracy 0.1% R.O. is available
( including non-linearity, hysteresis and repeatability)
û Small size and light weight, the Cable horizontal putting out type is possible.
û Excellent in solidity and a surge pressure
û Attached zero point adjustment
* Application
Automatic transmission testing equipment, Solenoid valve testing device, Fuel cell evaluation device

Specifications
Rated capacity 500 kPa ~ 10 MPa ( NS115P / High-accuracy type)
5 MPa ~ 50 MPa ( NS115 / Standard) )
Safe overload 200 % R.C.
Ultimate overload 300 % R.C.
Accuracy 0.1 % R.O. ( NS115P / High-accuracy type)
0.5 % R.O. ( NS115 / Standard type) )
( including non-linearity, hysteresis and repeatability)
Rated output Current : 4 mA ~ 20 mA ( 2 wires method, Load resistance 500 © or less, at 24 V)
Voltage : 0 V ~ 5 V, 0 V ~ 10 V ( Load resistance 5 k© or more) .
Zero adjustment range ± 1 %
Power supply voltage DC 24 V( 18 V ~ 28 V)
Power consumption Approx. 20 mA
Insulation resistance 1 000 M© or more ( DC 50 V)
Temp. range, compensated -20  ~ 70 
Temp. range, safe -30  ~ 80 
Temp. effect on zero 0.15 % R.O./ 10  ( NS115P / High-accuracy type)
1.0 % R.O./ 10 ( NS115 / Standard type)
Temp. effect on output 0.15 % LOAD/ 10 ( NS115P / High-accuracy type
1.0 % LOAD/ 10 ( NS115 / Standard type)
/ -ring seal FKM4-class D ( High-accuracy type) , NBR( Standard type)
Selectable by the medium.
Class of protection IP65
Material of pressure hole SUS316L ( high-accuracy type) , SUS304L ( Standard type)
Material of cover SUS316 ( high-accuracy type) , Aluminium ( Standard type)
Material of pressure diaphragm Single crystal sapphire
Mounting screw 1/ 8 e 1/ 4 e 3/ 8G{ PF} , { PT}
Weight NS115 : Approx. 200 g, NS115P : 250 g ( Main body only)
Tightening torque 20 Nem ~ 40 Nem