PL70 Motion Monitors

The PL70 Motion Monitor is a microprocessor controlled speed monitoring device, sensing not only underspeed status but also overspeed and zero speed. The....

Tilt Switch Probe - Model SL20

When material rises to tilt the probe 15° or more from its vertical position, the internal steel ball rolls off center and its normally closed....

PL40 Position Switches

Series PL position switches are utilized to monitor the position of heavy moving machinery such as a crane or skip. When the actuator roller is displaced....

PL50 Belt Damage Detector

PL50 Damaged Belt Detector warns supervisory personnel of impending belt failures due to rips, punctures, splice failures, or sharp objects protruding....

PL20 Safety Pull Switches

The Safety Pull Switch is mounted on or alongside the conveyor stringer, with one end of the pull wire fastened to a fixed post and the other end....

PL10-2D Run Off Switches

The PL10-2D Run Off Switch detects conveyor belt misalignment; two microswitches can trigger an alarm or conveyor shutdown to protect the conveyor belt....

SAIMO Weigh Screw Feeder System
Model: F65

The Saimo F65 Weigh Screw Feeder System is mainly used for metering of powdered material into a production process, with weighing....

SAIMO Heavy Duty Weigh Belt Feeder System
Model: F53

The Saimo F53 Heavy Duty Weigh Belt Feeder System features a rugged stringer type frame to offer high accuracy and minimal....

SAIMO Mid Range Weigh Belt Feeder System
Model: F52

The Saimo F52 Mid Range Weigh Belt Feeder System offers accurate and reliable weighing solution for a wide of range of....

SAIMO Low Capacity Weigh Belt Feeder System
Model: F51

The Saimo F51 Weigh Belt Feeder System is specially designed for light material handling, mainly in the food and....

SAIMO Coal Feeder for Fluidized Bed Boiler
Model: F57

Saimo F57 coal feeder is specially designed for feeding fuel or absorbent into all kinds of fluidized bed boilers applied....

SAIMO Pressure-resistant Gravimetric Coal Feeder
Model: F55

Saimo F55 Pressure-resistant Gravimetric Coal Feeder is specially designed to continuously feed specific amount of....

Saimo Series N61 Belt Scale System

With an accuracy level of within ± 1.0% , the Saimo Series N61 Belt Scale System is suitable for cement or other process applications where....

Saimo Series N62 Belt Scale System

The Saimo Series N62 Belt Scale System has an accuracy level of within ± 0.5% . It is specifically designed for general belt conveyor....

Saimo Series N63 Belt Scale System

The Saimo Series N63 Belt Scale System has an accuracy level of ± 0.25% . It is specifically designed for plant and process operations to....

Saimo Series N64 Precision Belt Scale System

The Saimo Series N64 Precision Belt Scale System is specifically designed for high accuracy and transfer of ownership applications....