ORBITAL SHAKER STUART

Orbital shakers - SSM1, SSL1

SSM1

Smooth orbital shaking action
Orbit of 16mm is ideal for larger samples, for example multi well plates
Built-in digital timer
Variable speed control to 300rpm
Supplied with non-slip mat for multi-well plates etc.
Optional accessory cradle system for flasks and bottles

The compact SSM1 provides a smooth uniform circular motion with an orbit of 16mm. It is supplied with a non-slip mat that can hold up to four multi-well plates or diagnostic cards. The shaking action is ideal for samples of 0.5 to 5ml held in multi well plates, dishes and Petri dishes.

The shaker can be used in incubators and environmental chambers ( up to 40C and 80% humidity) . Alternatively, an accessory cradle system is available that can accommodate a variety of vessels including flasks, bottles or beakers via four rubber securing bars.

It turns the SSM1 into a very effective mini platform shaker. It will hold up to: 4 x 250ml or 2 x 500ml or 1 x 1000ml Erlenmeyer 8 flasks or bottles.
These larger vessels are held between the rubber bars.
The flexible cradle system has the benefit that different combinations of vessels can be used offering maximum versatility.
Speed is variable from 30 to 300 rpm. Once set on the digital display, the shaking speed is effectively maintained even over long periods of time. Shaking times can be set to run for 1 to 999 minutes on the built-in digital timer, or the unit can be set for continuous operation.

SSL1
The SSL1 has all the features of the SSM1 but in a larger unit. The SSL1 also comes complete with a cradle system, rather than a non slip mat, to comfortably hold flasks.

The cradle type platform has four rubber cushioned horizontal securing bars with quick release handles.
They can be easily adjusted both vertically and horizontally to hold most sizes and types of vessel, including flasks, bottles and beakers.

For example, they will accommodate the following Erlenmeyer flasks or bottles:
12 x 250ml
or 9 x 500ml
or 6 x 1000ml or 2 x 2000ml.

The main advantage of this cradle system is that it can accommodate different sizes of vessel, a common requirement where shakers are used by different people in the laboratory.

Model SSM1 SSL1
Shaking action Orbital Orbital
Platform dimensions ( w x l) 220 x 220mm 335 x 335mm
Speed range 30 to 300rpm 30 to 300rpm
Orbit / amplitude 16mm 16mm
Maximum load 3kg 10kg
Overall dimensions ( w x d x h) 240 x 300 x 140mm 360 x 420 x 270mm
Operational temperature range + 4 to + 40 C + 4 to + 40 C
Maximum permissible humidity 80% 80%
Net weight 5kg 11kg
Electrical supply 230V, 50Hz, 50W 230V, 50Hz, 50W

Model Description
SSM1 Shaker, orbital, mini
SSM1/ 1 Accessory cradle with 4 securing bars
SSM1/ 2 Large platform ( 340 x 300mm, holds up 8 plates)
SSM1/ 3 Clear Acrylic lid
SSL1 Shaker, orbital, lab scale
SSL1/ 1 Accessory platform 510 x 510mm with six rubber
SSL1/ 2 Large flat platform, no cradle for SSL1