Katalog Produk

Keterangan

Panasonic Network Camera BB-HCM511CE ( Business Use)

These cameras can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA. Place them in your home, office, vacation home or almost anywhere else that you' d like to keep an eye on things, with no PC required on location! They are easy to install and operate and require no additional software for the PC that you' re viewing them on. Each camera also comes with a free Web address, which can track the camera automatically. All you need is a regular Web browser to view them on your PC, as all of the other required software, including control software ( TCP/ UDP) and e-mail software ( SMTP) , is already inside the camera.

An external microphone and amp-equipped speaker, both optional, enable two-way voice communication ( transceiver system) between the network camera and a PC used to monitor the camera image. In addition to conventional monitoring of images and sound, voice messages can be transmitted from the PC to the network camera. Voice transmission and reception can be switched easily from the PC used to monitor the image.

This camera features a CCD ( Charged Couple Device) for sharp, enhanced image expression. The image refreshing speed ( maximum) has been increased to 30 images per second for smoother displays of moving images.

The BB-HCM511A features an SD Memory Card slot for recording images and audio captured by the network camera directly onto an SD Memory Card ( sold separately) .

These cameras are attached through an Ethernet connection ( or router) and powered by PoE ( power over ethernet) . You don' t need a computer at each location you want monitored. Each camera has a built-in Web server with IP address. To view the camera' s images on a PC, simply open a graphics-capable Web browser and type in the cameras specified Internet address( password optional) .

Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. You can Pan/ Tilt the camera. You can also assign a " Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

This network camera can stream both MPEG4 and MJPEG allowing the viewer to favor viewing the feed from the standpoint of a more clearer image or a more fluid movement from frame to frame using less bandwidth for a given frame rate.

The camera can be set to automatically record video at certain times and certain speeds. In addition, with optional, external sensors attached to the camera, it is possible for the camera to email or record when triggered by motion, sound, light, timer, or even a push button. These convenient functions eliminate your need to constantly check the image.

With the built-in motion sensor, the camera can be set to record and/ or notify you by email when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room.

Features:

Simultaneous MPEG-4 and JPEG

SD/ SDHC Memory Card Recording

Progressive scan

Easy PoE Power Supply

Analog Video Output

Image Transfer Function

Remote Pan and Tilt Control

10x Digital Zoom Function ( by area)

Audio 2-Way Communication

Color Night View Mode ( 0.2 lux) & CCD Sensor

Multi-camera Capability

Cell Phone Monitoring

Server
Image compression : JPEG ( Motion JPEG) , MPEG-4
Video resolution : 640 x 480, 320 x 240 ( default) , 192 x 144
Image quality : JPEG ( favor clarity, standard, favor motion) , MPEG4
Frame rate : Max. 30 frames/ sec. ( 640 x 480, 320 x 240, 192 x144)
Security : User ID/ Password
Supported protocols : IPv4/ IPv6 Dual-Stack IPv4: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, POP3, NTP, UPnPTM, SMTP Authentication, RTP, RTSP, RTCP IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6, POP3, NDP, NTP, RTP, RTSP, RTCP
User access limit : Max. 30 simultaneous accesses
Buffered images : Approx. 350 images ( 320 x 240) • standard image quality • with time display • without using SD Memory Card
Image transfer method : SMTP, FTP, HTTP
Image buffer/ transfer triggers : Alarm, timer or motion detection

Network Camera
Zoom : 10x digital zoom ( by area)
Viewing angle : Horizontal: 54° ( total 174° ) , vertical: 40° ( total 105° )
Pan ( horizontal direction) : -60° to + 60°
Tilt ( vertical direction) : -45° up to + 20°
Revolving speed : Pan: Max. 80° / sec Tilt: Max. 80° / sec
Sensor type : 1/ 4 inch CCD sensor, approx. 320, 000 pixels
Lens focal point : Fixed ( focal range: 0.5 m to  )
Lens brightness : F2.8
Required light intensity : 2 to 100, 000 lux ( in color night view mode: 0.2 to 100, 000 lux)

Audio
Audio communication : 2-Way half duplex
Audio compression : ADPCM 32 kbps
Audio bandwidth : 300 Hz - 3.4 kHz
Audio input : Built-in microphone or external microphone input terminal
Audio output : Audio line output terminal for external speaker

Wireless
Standards : —
Antenna : —
Number of channel : —
Transmission speed : —
Security : —

Terminal
Network interface : Ethernet ( 10Base-T/ 100Base-TX)
External I/ O connector : Input: 2, output: 1
Video output : Analog composite ( NTSC/ PAL)
Audio output : 3.5 mm stereo mini jack ( output is mono)
External Microphone Input : 3.5 mm mini jack
SD Memory Card slot : Full size ( operation guaranteed for 2GB, 1GB, 512MB, 256MB, 128MB and 64MB SD Memory Cards)

General
Operating temperature : 0° C to + 40° C ( + 32° F to + 104° F)
Operating humidity : 20% to 80% ( No Condensation)
Dimensions ( H x W x D) : 100 x 100 x 74 mm ( 3 15/ 16 x 3 5/ 16 x 2 15/ 16 inches)
Weight ( only the unit) : 330 g ( 0.73 lb)
Power supply ( E) : PoE: 48 V, IEEEE 802.3af-compliant Power over Ethernet AC adaptor ( option) : input 100 - 240 V AC, output 12 V DC
Power supply ( CE) : PoE: 48 V, IEEEE 802.3af-compliant Power over Ethernet AC adaptor ( option) : input 100 - 240 V AC, output 12 V DC
Power supply( US) : PoE: 48 V, IEEEE 802.3af-compliant Power over Ethernet AC adaptor ( option) : input 120 V AC, output 12 V DC
Consumption : PoE: approx. 6.5 W AC adaptor: 7 W

Untuk penawaran harga dan pemesanan serta informasi produk lebih jelas silahkan hubungi kami di:
Hot line : 021-85414123 / 021-89622195
Esia : 021-96744360
Hp : 08561118486
E-mail : onepro_solution@ yahoo.com
Web : www.oneprotechnic.com