Katalog Produk

Keterangan

Main Application
• Die cavity of molds
• Bearings and other parts
• Failure analysis of pressure vessel, steam generator and other equipment
• Heavy work piece
• The installed machinery and permanently assembled parts
• Testing surface of a small hollow space
• Material identification in the warehouse of metallic materials
• Rapid testing in large range and multi-measuring areas for large-scale work piece

Advantages
• Large screen( 128× 64 dot matrix LCD) , showing all functions and parameters.
• Test at any angle, even upside down.
• Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
• Seven impact devices are available for special application. Automatically identify the type of impact devices.
• Large capacity memory could store 500 groups ( Relative to average times32^ 1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
• Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
• Battery information indicates the rest capacity of the battery and the charge status.
• User calibration function.
• USB port with the PC humanity multi-functions data proceeding software.
• Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
• NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours ( EL off and no printing) .
• Auto power off to save energy.
• Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.

Technical Specifications
• Measuring range : HLD 170^ 960 HLD
• Measuring direction : 360°
• Hardness Scale : HL
HB
HRB
HRC
HRA
HV
HS
• Display : dot matrix LCD 128× 64 dots
• Data memory : 500 groups max. relative to impact times 32^ 1
• Printing paper : width is  57.5± 0.5 mm, diameter is 30mm
• Battery pack : 6V NI-MH
• Battery charger : 9V/ 500mA
• Continuous working period : about 150 hours With backlight off, no printing
• Communication interface : USB1.1
• Outline dimensions : 212mm× 80mm× 32mm

Main Application
• Die cavity of molds
• Bearings and other parts
• Failure analysis of pressure vessel, steam generator and other equipment
• Heavy work piece
• The installed machinery and permanently assembled parts
• Testing surface of a small hollow space
• Material identification in the warehouse of metallic materials
• Rapid testing in large range and multi-measuring areas for large-scale work piece

Technical Specifications
• Measuring range : HLD 170^ 960 HLD
• Measuring direction : 360°
• Hardness Scale : HL
HB
HRB
HRC
HRA
HV
HS
• Display : dot matrix LCD 128× 64 dots
• Data memory : 500 groups max. relative to impact times 32^ 1
• Printing paper : width is  57.5± 0.5 mm, diameter is 30mm
• Battery pack : 6V NI-MH
• Battery charger : 9V/ 500mA
• Continuous working period : about 150 hours With backlight off, no printing
• Communication interface : USB1.1
• Outline dimensions : 212mm× 80mm× 32mm

Contact Us :
Mitra Guna Instrument
Lindeteves Trade Centre, Lt 2 blok C3 No. 6-7
Jl. Hayam Wuruk 127 Glodok Jakarta
Telp : 021-37699537, 0251-7543316
Hp : 081380328072, 082122104377
Fax : 0251-7543281