MIKASE LABORATORY - PT MITRA KATIGA SEJAHTERA / SUPPLIER ALAT UJI KUALITAS UDARA, AIR, CUACA , KEBISINGAN SERTA GETARAN

Keterangan

The HD2303.0 is a portable instrument with a large LCD display. It is designed for use in the fi elds of air conditioning, heating, ventilation and environmental
comfort. It uses hot-wire or vane probes to measure air speed, fl ow rate, and tem-
perature inside pipelines and vents. Temperature only is measured by immersion,
penetration or air contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000.
The probes are fitted with the SICRAM module, with the factory calibration settings already being memorized inside.
The Max, Min and Avg function calculate the maximum, minimum or average values. Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off that can also be disabled.
The instruments have IP67 protection degree.

INSTRUMENT TECHNICAL CHARACTERISTICS
Instrument
Dimensions
( Length x Width x Height) 140x88x38mm
Weight 160g ( complete with batteries)
Materials ABS
Display 2x41D2 digits plus symbols
Visible area: 52x42mm
Operating conditions
Operating temperature -5… 50° C
Warehouse temperature -25… 65° C
Working relative humidity 0… 90% RH without condensation
Protection degree IP67
Power
Batteries 3 1.5V type AA batteries
Autonomy ( * ) 200 hours with 1800mAh alkaline batteries
Power absorbed with instrument off 20¼ A
Measuring unit ° C - ° F - m/ s - km/ h - ft/ min - mph - knot - l/ s
m3/ min - m3/ h - ft3/ s - ft3/ min
Connections
Input module for the probes 8-pole male DIN45326 connector
Measurement of temperature by Instrument
Pt100 measurement range -200… + 650° C
Pt1000 measurement range -200… + 650° C
Resolution 0.1° C
Accuracy ± 0.1° C
Drift after 1 year 0.1° C/ year