Keterangan :

Features:

~ With Ultrasonic generator & Horn vibration and knife tight rub on material in slitting

~ With 35Khz ultrasonic auto tuning system, there are no noise and no need to adjust the frequency.

~ Cutting & sealing in one time, no dissipated edge & shrinkage, the tactile sense of finish good is smooth

~ Using the centering device to control the precision of slitting.

~ Using staggered axle to collect material, and pressure axle to fix the axis.

~ No pre-heat is needed for operation. Slitting process can be carried out immediately after switch on.

~ No smoke & danger

~ Easily to adjust the width of slitting

~ With inter-face control system.

~ Attached with automatic indicating system which is able to detect abnormal vibration form the ultrasonic system or the feeding webs when they are broken apart. The M/ C will be stopped running to avoid further defective loss.

~ The speed control by invert motor
Specifications
Model KS300
Work width 300mm
Minimum Slitting Width 10mm
Motor Speed 1-25m/ min
Ultrasonic System Max 600W / Horn Frequency 35KHz 2 unit
Line Source 50/ 60Hz 220V 3P
Air Source 6kg/ cm2
Knife 10 set