Keterangan :

The Velocity 14 incorporates all the
features and benefts of the Velocity 14R
without the refrigeration thus resulting in
an even smaller footprint.
Smaller Size, More Space
The Velocity 14 accommodates the same
rotors and capacity as the Velocity 14R.
The absence of refrigeration further
reduces the footprint by at least 50%
freeing up considerably more precious
bench space.
Smart, Compact, 2-in-1 Design
The versatile design of the Velocity
14 offers the best of both worlds from
the perspective of micro-volume and
medium-volume centrifugation. The
fA15A rotor is suffciently fast and yet
accommodating for up to 24 x 1.5/ 2 ml
tubes with a terminal velocity of 14, 000
RpM ( 18, 728 x g) whilst the fA15c rotor
has suffcient capacity for up to 6 x 50 ml
tubes reaching an impressive terminal
velocity of 14, 000 RpM ( 20, 290 x g)
Quick Set and forget Rotor System
screwing or bolting rotors to the drive
shaft is a thing of the past. likewise lost
spanners and rotor over tightening. With
the Velocity 14 simply place the rotor on
the drive shaft and that’ s all. The auto
lock and secure mechanism performs the
rest. once centrifugation is complete
simply lift the rotor off the drive shaft.
Quicker, easier, more effcient and safer.
Auto rotor recognition
Automatic rotor recognition and
confrmation once centrifugation has
commenced, including rotational
speed calculation and optimum
temperature control.
furthermore new rotors can be easily
loaded onto the on-board database as
they are introduced.

Fast Acceleration and Deceleration
The innovative high torque, drive
technology effortlessly accelerates even
the heaviest rotors to terminal velocity
quickly and effciently. even the heaviest
rotors with a full load will achieve
maximum velocity within a few minutes.
furthermore, 9 pre-set acceleration and
9 pre-set deceleration profles ensure
the best separation even for the most
delicate density gradients
High imbalance tolerances
innovative motor engineering and
mounting including a fexible drive shaft
allow for greater imbalance tolerances,
so much so that samples can be balanced
simply with the naked eye. no more
weighing just fll tubes or bottles to
within 5mm of each other.
Safety is Paramount
The Velocity 14 offers many safety
features in the unlikely event of an
emergency such as:
non-contact imbalance detection and
shutdown based on the run profle for
each rotor across its entire speed range
rather than the inferior and conventional
micro-switch detector.
guard barrier >
Dual lid electronic interlock >
Auto-hinge for improved sealing and >
door opening
over speed detection and shutdown >
Motor overheat detection and >
shutdown
User friendly operation and
information rich display
parameters are quickly and effortlessly
inputted through the uncomplicated
touch pad interface and displayed on
the brightly backlit and easy to read
LCD panel.

The lcD panel concurrently displays all
experimentation parameters including
diagnostic information as it occurs.
furthermore, once centrifugation has
commenced, a real time graphic profle
of the centrifugation status is displayed.
Quiet Operation
noise abating insulation in the console
including lower noise fans combine to
reduce the audible operating noise
to d53 dB.
Liquid Seeping Prevention
A single continuous rubber cap with
strong gasket, frmly seals the motor
chamber opening and drive shaft to
prevent liquid from seeping into the
motor and electronic components. As
additional back-up, a highly absorbent
sponge positioned beneath the rubber
cap soaks up any liquid or condensation
which then evaporates during operation.