DELTA SHOP
Anggota Gratis
DELTA SHOP
http://indotrade.id/deltashop-computer/
Informasi Kontak
Nama:
Ibu Dona Bertha Situmorang
[Pemasaran]
E-mail:
Pesan Instan:
Y!: dona_cimot@yahoo.com 
Nomor Telpon:
Nomor telpon Ibu Dona Bertha Situmorang di Jakarta Pusat
Nomor Ponsel:
Nomor ponsel Ibu Dona Bertha Situmorang di Jakarta Pusat
Nomor Faks:
Nomor faks Ibu Dona Bertha Situmorang di Jakarta Pusat
Alamat:
Harco Elektronika Mangga Dua Lt.2 Blok B No.133 Jl.Mangga Dua Raya
Jakarta Pusat 10730, Jakarta
Indonesia
Best Regards, Dona Situmorang | Business Representative Delta Shop | Harco Elektronika Mangga Dua Lt.2 Blok B No.133 Jl.Mangga Dua Raya | Jakarta 10730 Telp. 021 - 50511287 / 021 - 92784490 Mobile. + 62 82112369843 E-mail dan YM. dona_ cimot@ yahoo.com
Rata-rata Tinjauan Pemakai

Tidak ada ulasan untuk perusahaan ini

Menulis tinjauan

Jual

Fuji Xerox DocuCentre-II 4000 Copier Machine[28 Oct. 2011, 3:53:37]
HargaRp.72.600.000,-
Jumlah Pesanan:
Cara PembayaranTunai
JumlahTerbatas (Limited)
Kemas & PengirimanDus
Negara AsalJepang
DocuCentre-II 4000

Copier Type Console Type

Copy Speed 45ppm

Memory Standard RAM:
128MB ( DC Configuration, Shared Memory)
256MB ( CP Configuration, Shared Memory)

Scanning System Flat-bed scanning method by CCD image sensor ( Fix Method)

Resolution IIT: 600 x 600 dpi, IOT: 600 x 600 dpi

Maximum Original Paper Size Platen: 297mm x 420mm ( A3) , 279.4mm x 431.8mm( 11" x 17" ) ,
Non-Standard Size 297mm x431.8mm
DADF: 297mm x 420mm ( A3) , 279.4mm x 431.8mm( 11" x 17" )

Maximum Paper Size Bypass: 297mm x 431.8mm

Paper Weight Tray 1: 60gsm to 105gsm
Tray 2: 60gsm to 216gsm
Tray 3& 4 ( 2TM & TTM) : 60gsm to 216gsm
Bypass: 60gsm to 216gsm
HCF: 56gsm to 216gsm

Warm-up Time 30 seconds or less ( DC/ CP configuration with 256MB, without HDD) *
* Conditions: the device should be connected to a network, and the IP address is to be set at the device.
When HDD is added, warm-up time might be extended.
Warm-up Time of CPS configuration ( with 512MB, HDD) is 30 seconds or less.

FCOT 3.2 seconds or less
Conditions: platen copy, power ON, Fuser ready, ROS ready, A4LEF from Tray1, 80gsm premier or business paper

Paper Source Front Loading Trays: Tray 1, 2, 2TM and TTM
Tray 1, 2: 500 sheets each ( 80gsm)
Two Tray Module ( Tray 3 & 4) : 500 sheets each ( 80gsm)
Tandem Tray Module: 800 sheets + 1, 200 sheets ( 80gsm)
High Capacity Feeder: 2, 000 sheets ( 80gsm)
Bypass Tray: 95 sheets ( 80gsm)
Bypass Tray: 100 sheets ( 64gsm)

Maximum Quantity Selector 999 sheets

Power Source & Maximum Power Consumption Power source: 14 A ( 110V) , 8 A ( 220V)
Power consumption* : 1.50KVA Max ( 110V) , 1.44 KVA Max. ( 120V) , 1.76KVA Max. ( 220V) , 1.92KVA Max. ( 240V)

* Power consumption is specified assuming full configuration of: IOT with Bypass Tray + Duplex Kit + Two Tray Module + Finisher + DADF + IIT + Controller with UI

Machine Size & Machine Weight IOT with Bypass Tray + DADF: 640± 5( W) x 652± 5( D) x 832± 5( H) mm, 73kg
( Bypass Tray is closed, without Side Tray)

Two Tray Module: 540± 5( W) × 520± 5( D) × 280± 5( H) mm, 20Kg
Tandem Tray Module: 540± 5 ( W) × 520± 5 ( D) × 280± 5 ( H) mm ( Foot not included) , 34Kg
B Finisher: 570± 5( W) × 585± 5( D) × 940± 5( H) mm, 30Kg
C Finisher: 675( W) × 650( D) × 1010( H) mm, 50Kg
C Finisher with Booklet Maker: 824mm( W) x 650mm( D) x 1, 010mm( H) , 81kg

Space requirements 976mm ( W) x 652mm ( D) ( without Finisher)
1, 537mm ( W) x 667mm ( D) ( with B Finisher)
1, 747mm ( W) x 677mm ( D) ( with C Finisher)
1, 805mm ( W) x 677mm ( D) ( with C Finisher with Booklet Maker)

Installation Space 1, 340mm ( W) x 1, 185mm ( D) ( without Finisher)
2, 140mm ( W) x 1, 185mm ( D) ( with B Finisher)
2, 240mm ( W) x 1, 185mm ( D) ( with C Finisher)
2, 300mm ( W) x 1, 185mm ( D) ( with C Finisher with Booklet Maker)

Printer ( option)
CPU Power PC-350MHz ( DocuCenter)
Power PC 750CX-600MHz ( ApeosPort)

Printing Method Laser Xerography

Print Speed 45ppm ( A4 LEF) 55ppm ( A4 LEF)

Warm up Time CP: 30 seconds or less ( with 256MB, without HDD)
* When HDD is added, warm-up time might be extended.
CPS: 30seconds or less ( with 512MB and HDD)

Memory Standard: 256MB
Expandable using optional 256MB memory

HDD: Option

Resolution ( real) PostScript: 600 x 600dpi
1, 200 x 1, 200dpi

PCL6/ 5e: 600 x 600dpi
1, 200 x 1, 200dpi

Smoothing Function 1, 200dpi

PDL Standard PCL6, PCL5e

Option Adobe PostScript Level 3

Emulation Standard TIFF, FX PDF, HPGL, HPGL2, KS/ KSSM, KS5895, ESCP, ESC/ P-K, RTL

Printer Driver Supported OS
PCL5e PCL6 PostScript
Windows 2000 - # # # # # # # # # # # # # # # # # #
Windows XP - # # # # # # # # # # # # # # # # # #
Windows Server 2003 - # # # # # # # # # # # # # # # # # #
Windows Vista - # # # # # # # # # # # # # # # # # #
Mac OS* - - # # # # # # # # #
* Supported for Mac OS® [ PPD: 8.6-9.2.2, Plugin: 10.3.9-10.4.x]

Connectivity 100Base-TX/ 10Base-T, Parallel Port ( IEEE1284) , USB2.0 ( option)
Token Ring NOT supported

Network Protocol TCP/ IP, IPX, SPX, Ether Talk, SMB, IPP, NetBEUI, RFC1876, Port9100,

Relation with Host Interface
Centro SMB NetWare AppleTalk TCP/ IP IPP Port9100
PCL6/ PCL5e Yes Yes Yes N/ A Yes Yes Yes
PS3 Yes Yes Yes Yes Yes Yes Yes
Emulation Yes Yes Yes N/ A Yes Yes Yes

Fonts Standard PCL fonts: 81 roman fonts

Option PostScript fonts: 136 roman fonts

Centre Ware Internet Services
( EWS) Embedded
Network Scanner ( option) - Requires Printer Kit, HDD and Scan kit
Maximum Original Paper Size Platen: 297mm x 420mm ( A3) , 279.4mm x 431.8mm( 11" x 17" ) ,
Non-Standard Size 297mm x431.8mm
DADF: 297mm x 420mm ( A3) , 279.4mm x 431.8mm( 11" x 17" )

Scanning Method Flat-bed scanning method by CCD image sensor ( Fix Method)

Resolution Binary: 600 x 600dpi, 400 x 400 dpi, 300 x 300dpi, 200 x 200dpi

Scanning Speed * 1 52dpm ( 35/ 45ppm) / 55dpm ( 55ppm) ( A4LEF, ITUT-T No.1 Chart, 200/ 300/ 400/ 600dpi, Scan to Mailbox)

Scan Features -Scan to Mailbox
-Scan to FTP
-Scan to e-mail
-Scan to SMB
-Box Job flow
-Scan to IFAX

Scan Format TIFF ( MH, MMR) , PDF, XDW

Scan to Mailbox Protocol TCP/ IP ( HTTP)

Format Monochrome binary: TIFF

Driver TWAIN

Compliant OS Windows® 2000/ XP, Windows Server ™ 2003, Windows Vista ™

Scan to PC Protocol TCP/ IP ( SMB, FTP)

Format Monochrome binary: TIFF ( Compression method: MH, MMR) , DocuWorks, PDF

Compliant OS Windows® 2000/ XP, Windows Server TM 2003, Mac OS® * 2* 3, NetWare 5.11/ 5.12* 2, Windows Vista TM

Scan to e-Mail Protocol TCP/ IP ( SMTP)

Format Monochrome binary: TIFF ( Compression method: MH, MMR) , DocuWorks, PDF

* 1 Scanning speed varies depending on originals and resolution.
* 2 Only FTP protocol can be supported.
* 3 Supported for Mac OS® X [ 10.1.5/ 10.2.x/ 10.3.8/ 10.3.9/ 10.4.2/ 10.4.4]
Fax ( option) - Option for DC/ CP/ CPS configurations
Capability G3

Transmission Speed G3 modem: 33, 600 / 31, 200 / 28, 800 / 26, 400 / 21, 600 / 19, 200 / 16, 800 / 14, 400 / 12, 000 / 9, 600 / 7, 200 / 4, 800 / 2, 400bps
Less than 3 Seconds ( G3: 28.8kbps, JBIG)

Compression System MH, MR, MMR, JBIG

Sending Document Size A3, B4, A4

Number of Mailboxes ( Fax receive) Up to 200 / password-protected mailboxes

Transmission Resolution Standard: 8 x 3.85 line/ mm, 200 x 100 dpi
Fine: 8 x 7.7 line/ mm, 200 x 200 dpi
Super Fine ( 400dpi) : 400 x 400dpi
Super Fine ( 600dpi) : 600 x 600dpi

Applicable Lines PSTN, PBX

Group Dial 50 ( 20/ groups)

Speed Dial 500 ( Standard)

Additional Line Max. 2 lines can be added ( total 3 lines) ,

Memory Standard: 8MB
HDD: Optional required
Direct Fax ( option) - Standard for CFP configurations
Capability G3

Transmission Speed G3 modem: 33, 600 / 31, 200 / 28, 800 / 26, 400 / 21, 600 / 19, 200 / 16, 800 / 14, 400 / 12, 000 / 9, 600 / 7, 200 / 4, 800 / 2, 400bps
Less than 3 seconds ( G3: 28.8kbps, JBIG)

Sending Document Size A3, B4, A4

Transmission Resolution Standard: 8 x 3.85 line/ mm, 200 x 100 dpi
Fine: 8 x 7.7 line/ mm, 200 x 200 dpi
Super Fine ( 400dpi) : 400 x 400dpi
Super Fine ( 600dpi) : 600 x 600dpi

Supported OS Windows Server â„¢ 2003, Windows Vista â„¢
Internet Fax ( option) - Internet Fax requires Printer Kit, Fax Kit, HDD and Internet Fax Kit
Capability 1) Scan to iFAX ( e-Mail) : Direct document transmission to remote Internet Fax machines or e-Mail clients ( SMTP) . Reception and automatic printout of documents sent via e-mail from remote Internet Fax machines or e-Mail clients
2) iFax Receive
3) iFax ( e-Mail) to Fax: send the image received by e-Mail to Fax machine
4) Fax to iFax ( e-Mail) : transmit the Fax- received image to e-Mail
5) Direct iFax ( Intranet only)

Original Paper Size A3SEF, B4SEF, A4SEF ( scanned data shall be changed to these sizes.)

File Format TIFF-FX: Profile ( TIFF-S, TIFF-F, TIFF-J)

Compression Method MH, MMR, JBIG

Network Protocol Send Protocol: SMTP ( Simple Mail Transfer Protocol)
Receive Protocols: SMTP, POP3 ( Post Office Protocol 3)

Resolution Standard: 8 x 3.85 line/ mm, 200 x 100 dpi
Fine: 8 x 7.7 line/ mm, 200 x 200 dpi
Super Fine: 400 x 400 dpi
600 x 600 dpi
Duplex Automatic Document Feeder
Capacity 75 sheets ( 80gsm)

Original Paper Size Max.: 297mm( W) × 600mm*
Min.: 139.7mm( W) × 210mm

* When the length of the original paper exceeds 432mm, it is recommended to manually lift the paper end from the bottom to enable straight feeding. In this case the paper weight shall be between 60 to 90gsm, but the performance is not guaranteed.

Scanning Speed 52dpm ( 35/ 45ppm MC, A4LEF, simplex mode)
55dpm ( 55ppm MC, A4LEF, simplex mode)

Size Detection A5 SEF, A5LEF, B5 SEF, B5 LEF, A4 SEF, A4 LEF, B4 SEF, A3 SEF
8.5" x 11" ( Letter) SEF, 8.5" x 11" ( Letter) LEF, 11" x 17" SEF
16-Kai LEF, 8-Kai SEF

Original Paper Weight Simplex mode: 38gsm to 128gsm
Duplex mode: 50gsm to 128gsm

Mixed Size Originals Available when selected on the user interface
A5SEF& B5SEF cannot run together using Mixed Size mode.

Machine Size 560( W) × 513( D) × 123( H) mm

Machine Weight 10Kg
B-Finisher ( option)
Machine Size / Machine Weight 570mm( W) x 585mm( D) x 940mm( H) / 30kg

Capacity of Stacker Non-staple: 1, 000 sheets ( size of Letter / A4 and smaller) Staple: 50 sets

Paper Weight 64 to 105gsm ( Non stapled) , 64 to 90gsm ( stapled)

Capacity for Stapling 50 sheets ( 80gsm)

Applicable Paper Size for Stapling Max: A3, 11" x 17" Min.: B5

Positions to Staple 3 Positions ( 5 variations) ; Front corner ( single) , rear straight ( single) , dual

Capacity of Staples 5, 000 ( initially packed with the finisher)

Power Source 100-240V AC supplied from the connected IOT

Power Consumption 70VA or less
C-Finisher ( option)
Machine Size / Machine Weight 675mm( W) x 650mm( D) x 1, 010mm( H) / 50kg

Capacity of Stacker Non-staple: 3, 000 sheets
Staple: 200 sets with single stapling, 100 sets with dual stapling

Capacity for Stapling 50 sheets ( 60gsm to 90gsm)

Applicable Paper Weight for Stapling 60gsm to 90gsm

Applicable Paper Size for Stapling Max: A3, 11" x 17" Min.: B5

Positions to Staple 4 Positions: Front corner ( single) , Rear corner ( single) , Rear straight ( single) , Dual

Capacity of Staples 5, 000 ( initially packed with the finisher)

Available Paper Size for Punching Max: A3, 11" x17" , Min: B5

Hole Punch 2/ 4 hole ( 2/ 3 hole is available with optional 2/ 3 Hole Punch Kit)

Power Source 100-240V AC

Power Consumption 70VA or less
C-Finisher with Booklet Maker
Machine Size / Weight 824mm( W) x 650mm( D) x 1, 010mm( H) / 81kg

Capacity of Stacker Non-staple: 1, 500 sheets
Staple: 200 sets with single stapling, 100 sets with dual stapling

Capacity of Booklet Tray 15 sets or less

Capacity for Stapling 50 sheets ( 60gsm to 90gsm)

Applicable Paper Weight for Stapling 60gsm to 90gsm

Applicable Paper Size for Stapling Max.A3, 11" x 17" Min.: B5

Positions to Staple 4 Positions: Front corner ( single) , Rear corner ( single) , Rear straight ( single) , Dual

Capacity of Staples 5, 000 ( initially packed with the finisher)

Capacity for Booklet Making Staple: 2 to 15 sheets
Un-staple: 5 sheets or less

Applicable Paper Weight for Booklet Making 60 to 90gsm

Applicable Paper Size for Stapling Max.A3, 11" x 17" Min.: B5

Capacity of Booklet Staples 5, 000 x 2 ( initially packed with the finisher)

Available Paper Size for Punching Max: A3, 11" x17" , Min: B5

Hole Punch 2/ 4 hole ( 2/ 3 hole is available with optional 2/ 3 Hole Punch Kit)

Power Source 100-240V AC

Power Consumption 100VA or less

Syarat Pembelian DocuCentre-II 4000:
Mengikuti kontrak service dari Authorized Distributor.

Kontrak Service:
Untuk pemakaian minimal 6.000 lembar kertas Rp.594.000, -
Pemakaian selanjutnya ( next click) atau untuk pemakaian di atas 6.001 lembar kertas - 20.000 lembar kertas biaya perlembar kertasnya @ Rp.95, - ( sembilan puluh lima rupiah)
Masukan ke Produk RekananKenalkan ke teman Anda
Anda mendapat [3] permintaan baru.
Ke Menu Anggota
Depan - Penawaran Dagang - Daftar Produk - Daftar Permintaan - Daftar Kerjasama - Daftar Perusahaan
© 2025 Indotrade.id. Hak Cipta Dilindungi Undang-undang.