Allied Telesis AT-AR236E ADSL Bridge/ Router
ADSL Router, 1xRJ11, 1x10/ 100BaseTX, 1xUSB & NAT Firewall, ADSL 2/ 2+
Main Features
ADSL/ ATM Support
ANSI T1.413-1998 Issue 2, ITU-T G.992.1 ( G.dmt) ,
G.992.2 ( G.lite) , G.992.3 ( G.dmt.bis) , G.992.4 ( G.lite.bis) ,
G.992.5 ( ADSL2+ ) , G.992.3/ 4 Annex L ( RE-ADSL2) ,
G.992.5 Annex L ( RE-ADSL2+ ) and G.992.5 Annex M
compliant
Rate Adaptive modem at 32Kbps steps
Dynamic Adaptive Equalisation to improve carrier’ s
service area
Bridge Tap Mitigation
ATM Layer with traffic shaping QoS
( UBR, CBR, VBR-rt, VBR-nrt)
AAL ATM attributes – AAL5
Multiple PVC up to 8 ( bridged)
Spectral compatibility with POTS
F5 OAM loopback/ send and receive
Encapsulation Support
RFC 2684 Bridge and Routed LLC and VC Mux
RFC 2364 PPPoA Client
RFC 2516 PPPoE Client
RFC 2225/ 1577 Classical IP
Transparent Bridge
PAP/ CHAP/ MS-CHAP for Password Authentication
Network Support
Static IP, Dynamic RIP routing
IP/ TCP/ UDP/ ICMP/ ARP/ RARP application
Network Address Translation ( NAT)
Port mapping/ forwarding
Easy setup of port forwarding rules for popular
games/ applications
NAT Application Level Gateway for popular applications
DHCP server/ relay/ client
DNS relay agent
DMZ
IPSec and PPTP/ L2TP VPN pass-through
PPP always on with configurable timeout
PPP Dial on Demand
Universal Plug and Play ( UPnP)
Management Support
Web based HTTP management GUI
Web based firmware upgrade ( local)
Soft Factory Reset Button via web GUI
Diagnostic test ( DSL, OAM, Network, Ping)
Telnet/ CLI ( Read Only)
Syslog
Firmware upgradeable for future feature enhancement
Security Support
NAT for basic firewall
Packet Filtering firewall
Stateful Packet Inspection
Protection against Denial of Service attacks
Password Authentication to modem
Hardware
Texas Instrument TNETD7300 Single Chip Network
Processor/ AFE/ Line Driver Chipset
2MB Flash ROM
8MB SDRAM
Dying Gasp
ITU K.21
Platform Support
OS independent for Ethernet
Windows 98SE/ 2000/ Me/ XP/ 2003 for USB
Power Requirements
Input Voltage: 9vDC + / - 10%
Input Current: 1.0A
Physical Specifications
LED Indicators
1 x PPP
1 x Power
1 x DSL
1 x Ethernet/ Activity
1 x USB
External Connectors
1 x ADSL/ 2/ 2+ port ( RJ-11)
1 x USB 1.1 port ( Type B)
1 x Ethernet 10/ 100 port ( RJ-45; auto MDI/ MDI-X)
1 x Reset button ( restore to factory defaults)
1 x DC power jack ( 9V)
Measurements
Dimension: 144( L) x 109( W) x 30( H) mm
Weight: Approx. 250g
Environmental Characteristics
Operating temperature: 0° C to 40° C
Non-operating temperature: -25° C to 70° C
Operating humidity: 30% to 80% Relative
Humidity ( Non-Condensing)
Non-operating humidity: 30% to 95% Relative
Humidity ( Non-Condensing)
Key Features
• Supports RE-ADSL2/ 2+ , ADSL2/ 2+ , G.dmt.bis,
G.lite.bis, G.dmt and G.lite ADSL standards,
Annex A or B
• Supports ADSL standards Annex L
and Annex M
• Up to 24Mbps downstream, and
up to 3.5Mbps upstream data rate
• 1 x ADSL/ 2/ 2+ port
• 1 x USB port
• 1 x 10/ 100 Ethernet port
• Network Address Translation ( NAT)
• Integral Stateful Inspection Firewall
• Integral Intrusion Detection System
• IPSec, PPTP and L2TP VPN pass-through
• Dynamic port opening for gaming applications
• Browser-based GUI
• PAP/ CHAP/ MS-CHAP authentication
• Dynamic IP address assignment
• Static IP address assignment
• Dynamic Host Configuration Protocol ( DHCP)
server/ relay/ client
• SNMP v1 and v2c
• Compact form factor
• Flash upgradeable