Katalog Produk

Keterangan

6201
Description
pH/ mV/ Temp. bench meter, microprocessor based with red LED digital display and manual or Pt-100 ATC temperature compensation. Connectors are a BNC input, reference input pin and banana plug connectors for the ATC . Meter does not offer direct Ion concentration readout but requires data to be graphed and interpreted. AC Powered only built in transformer 115/ 230 volts.

* Touch key control
* Splash proof front panel
* Electrode offset recognition
* Electrode slope recognition
* NBS buffer recognition, 4.01, 7, 10.01
* Isopotential point could be 7.00 or 6.86 specify when ordering
* Stored in buffer t.c.
* Automatic slope calculations
* Flame retardant rugged plastic case
* 0.1 mv resolution over wide range for ion analysis
* Seven error indicators
* Easy to use
* 50 hz, 60 hz rejection
* Manual and automatic temperature compensation
* 0.56 high efficiency red led
* Audio feedback for touch keys and error indicators

Specifications
pH
Range : 0 to 14.00 pH Resolution : 0.01pH
Accuracy : ± 0.1%
ORP
Range : -2047 to 2047 mV
Resolution : 1 mV
Accuracy : ± 0.05
ORP( E )
Range : -409.5 to 409.5 Emv
Resolution : 0.1 mV
Accuracy : ± 0.05%
Temp.
Range : -10 to 125 ° C 1
Resolution : ° C
Accuracy : ± 0.5

General
o Display hold: Yes
o Buffer recognition: pH 10.01, pH 7.00, pH 4.01
o Buffer temp range: 0 to + 60.9 ° C
o Electrode slope recognition: ± 20% at pH 4.01, pH 10.01 e2 -- indicate electrode
o Electrode offset recognition: ± 60 mV at pH 10.01, pH 7.00, pH 4.01 e1 --indicate
o Reading averaging: Display indicates average value per 4 readings
o Display update: 532 ms
o Input impedance: Greater then 10exp( 12) ohms
o Audio feedback: Touch keys( except hold and reset keys) , error alarm
o Display: 0.56 high efficiency red LED
o Power source: 117VAC, 234 VAC, ± 15%
o Dimension: 250 x 240 x 100 mm
o Weight: 1.5 kg