Katalog Produk

Keterangan

Description
1/ 4 DIN panel mount ORP controller/ transmitter, microprocessor based, password protected with membrane keypad. LCD displays ORP or pH and temp. Meter has dual SPDT Hi/ Lo relays, with programmable hysteresis and a reversible, isolated and programmable 4-20 mA output. Connectors are dual BNC for pH/ ORP and spade lug type. ATC is 10K thermistor or simulation resistor. Power 115 / 230V AC.

* Controls ORP & measures pH
* Offset calibration for ORP
* Set point security code protection
* Dual on/ off relays
* 0.5 high LCD display
* Auto/ manual temp. compensation
* Power down memory backup
* Audio feed back touch keys
* 1/ 4 DIN housing

Specifications
pH
Range : -2.00 to 16.00 pH Resolution : 0.01 pH
Accuracy : ± 0.01pH ± 1 digit
ORP
Range : -1999 to 1999 mV
Resolution : 1 mV
Accuracy : ± 0.1% ± 1 digit
Temp.
Range : 0 to 115 ° C
Resolution : 0.1 ° C
Accuracy : ± 0.2 ° C ± 1 digit

Current Output

* Isolated current output: Reversible & programable 4 to 20 mA
* Isolation voltage: 500V DC maximum
* Transmitter load: 550 ohms maximum

General

* Input impedance: > 10exp( 13) ohms
* Default ORP buffer: 86mV
* Temperature compensation: Auto/ manual ( thermistor 10kw at 25 ° C
* pH buffer recognition: 4.00. 6.86. & 9.18
* pH slope recognition: ± 30%
* Relay output ( resistive load) : 5amp at 115V AC or 2.5 amp at 230V AC
* Relay set point hysteresis: User programable
* Power failure back up: Yes
* Power source: 115V AC or 230V AC, 50/ 60 hz
* Weight: 750 grams