Katalog Produk

Keterangan

Clamp your instrument around the pick-up coil of the multi-tran.
Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below.
Multiply the reading of your clamp meter by 10 to obtain the current value measured.

Measuring Range : 0~3000A AC
Ratio/Range : 10 : 1 (input to output)
Accuracy : |±2% of input±0.5A
Allowable
Measurement Time : 0~1000A (continuous), 1000~1500A (10 minutes max.)
3000A (30 seconds max.)
Conductor Size : Ø100mm max.(100 × 150mm)
Frequency Response : 50Hz/60Hz
Safety Standard : IEC61010-1 CAT.III 300V Pollution Degree 2
Withstand Voltage : 3000V AC for 1 minute
Dimensions : 317(L) × 150(W) × 30(D)mm
45(L) × 40(W) × 10(D)mm Output coil
Weight : 750g approx.
Accessories : 9056(Carrying Case)
For use with
following models * 2002PA, 2002R, 2003A(AC only), 2004(AC only), 2006,
2007A(AC only), 2009A(AC only), 2608A, 2805, 2017, 2027,
2037(AC only), 2412, 2417, 8113(AC only), 2031, 2033(AC only), 2431, 2432, 2433, 2433R, 2434

* These Multi-Trans can not be used for leakage current measurement