Katalog Produk

Keterangan

It is a flexible and modular-based system for learning analog and digital communications.
The advantage is that the student establishes his own rate of work, thus rendering unnecessary to keep level with the rest of the class.
Varying with work mode, areas of study and number of working posts it is possible to choose the desired configuration.
Being a modular and open system, it is very economical and may be enlarged depending on required needs; all previously acquired systems are
fully compatible and continue to be used. The Communications modules are specifically designed for an in-depth analysis and study of analog and digital communications and
modulation techniques.
The students may use these modules in independent way one of another,with an external “FA-CO�. power supply, or with the “EBC-100�. Base
Unit.
Test points for measurements in the modules and there is the possibility faults simulation.
Real components easily visible forthe student.
What are the parts included in the laboratory?
FA-CO.
Using this system training and practices can be done in the traditional way. This is the most common power supply used.
EBC-100. (optional)
This unit is self-complete, having hardware, power supply and the necessary connections for supplying power and allocating
the available modules.
Includes:
2.1) INS/SOF. Classroom Management Software Package (Teacher Software) Only one package is needed per classroom.
2.2) Computer Aided Instruction Software Packages (Student /Module Software). Each module has it’s own package.
Includes:
3.1) Hardware:DAIB. Data acquisition interface box+DAB. Data acquisition board.
3.2) Software: EDAS/SOF. Data acquisition software.
The software allows the computer to become in several instruments.
By using some switches in the modules we can simulate some faults.
Windows, based software, simple and easy to use, specifically developed for use with EDIBON communications modules.
There is a manual for each module. ( 8 manuals normally supplied).
Connectors and cables for completing the exercises and practices, and power supply cables are supplied.
included:
Powersupply + Modules+ Manuals. ( Any module needs powersupply).
See in the last page.
Power supply:
Power Supply:
Base Unit:
CAI. Computer Aided Instruction Software System:
EDAS. EDIBON Data Acquisition System:
VIS. Virtual Instrumentation:
FSS. Faults Simulation System:
LICOMBA/CAL.
Modules:
- Complete LICOMBA LABORATORY:
Minimum supply:
- Working possibilities. The EDAS/VIS System includes a Hardware: DAIB Data Acquisition Interface Box + DAB. Data Acquisition Board and a Software: EDAS/VIS-SOF.
Data Acquisition and Virtual Instrumentation Software:

1 DAIB. Data Acquisition Interface Box:
Steel box.
Dimensions: 310 x 220 x 145 mm. approx.
Front panel:
16 Analog inputs.
Sampling velocity 1,250,000 samples per second for EDAS/VIS 1.25 Version.
Sampling velocity 250,000 samples per second for EDAS/VIS 0.25 Version.
2 Analog outputs.
24 Digital inputs/outputs, configurable as inputs or outputs, with 24 state led indicators. These digital inputs/outputs are grouped in three ports of eight channels (P0, P1 and P3).
Digital signal simulator.
Analog signal simulator.
Main ON/OFF switch.
Inside:
Internal power supply of 12 and 5 V. Potentiometer.
Back panel:
Power supply connector.
SCSI connector (for connecting with the data acquisition board).
Connecting cables.

2 DAB. Data Acquisition Board:
For EDAS/VIS 1.25 Version:
PCI Data acquisition board (National Instruments) to be placed in a computer slot. Bus PCI.
Analog input:
Number of channels= 16 single-ended or 8 differential.
Resolution=16 bits, 1 in 65536.
Sampling rate up to: 1,250,000 S/s (samples per second).
Input range (V)=± 10V.
Data transfers=DMA, interrupts, programmed I/0. Number of DMA channels=6.
Analog output:
Number of channels=2.
Resolution=16 bits, 1 in 65536.
Maximum output rate up to: 833 KS/s.
Output range(V)=±10.
Data transfers=DMA, interrupts, programmed I/0.
Digital Input/Output:
Number of channels=24 inputs/outputs.
D0 or DI Sample Clock frequency:0 to 1 MHz.
Timing:
Counter/timers=2.
Resolution: Counter/timers:32 bits.
For EDAS/VIS 1.25 Version:
Sampling rate up to: 250,000 S/s (samples per second).
Rest of characteristics are the same.

3 EDAS/VIS-SOF.Data Acquisition and Virtual Instrumentation Software:
Compatible with actualWindows operating systems.
Amicable graphical frame.
Configurable software allowing the representation of temporal evolution of the different inputs and outputs.
It allows all data store in a file (16 analog inputs, 2 analog outputs, 24 digital inputs/outputs at the same time).
Print screens and reports of the signals at any time.
Quick capture in a period of time and posterior representation (Sampling and Hold).
Two signal generators, independent for sinusoidal, triangular, saw and square.
Visualization of a tension of the circuits on the computer screen.
Sampling velocity 1,250,000 samples per second for EDAS/VIS 1.25 Version.
Sampling velocity 250,000 samples per second for EDAS/VIS 0.25 Version.
Measurement, analysis, visualization, representation and report of results.
All 16 input channels could be scaled to compare signal with different voltage levels.
Virtual instrumentation functions:
Digital oscilloscope.
Multimeter.
Function generator.
Spectrum analyzer.
Transient recorder.
Logic analyzer.
Logic generator.

Manuals:
This system is supplied with 8 manuals: Required Services, Assembly and Installation, Interface and Software, Starting-up, Safety, Maintenance, Calibration (for computer controlled units) & Practices Manuals.

This system can be used with:
- All Modules type “M� (M1 to M99) of Basic Electronics (LIELBA).
- All Modules type “ED-CAM, ED-CFM and EDICOM� of Communications (LICOMBA).
- Transducers and Instrumentation Trainer (SAIT).
* Any other electronic board. Masukan ke Produk RekananKenalkan ke teman Anda